Secondary Containment for railroads!

  • Ultra-Track Pans have been designed to provide railroad spill containment at industrial rail sidings and locomotive maintenance facilities. Available in virtually any length, Ultra-Track Pans may be used to collect small spills and leaks OR to capture and channel off significant spills caused by defective equipment or a major overflow.
  • Prevent costly cleanup and regulatory fines from railcar spills and chemical spills.
  • Modular Design – Center and Side Pans are 53.5″ long; railroad spill containment areas can be easily assembled to any length desired
  • All-polyethylene Construction – Rugged Track Pans withstand harsh chemicals and are designed to function in temperatures ranging from -40°F to +140°F
  • Sealed System – Polyethylene gaskets keep spills from falling between the rails and Pans.
  • Trucks and other vehicles can drive over Track Pans with grates in place (NOTE:  To drive over Track Pans, firm footing must be beneath the Pans; also must “ramp up” to Side Pans with asphalt or concrete)
  • An economical, easy to install railroad spill solution.
  • Modular Track Pan design can be customized to meet your specific railroad spill containment needs.
  • Optional Track Pan Covers Keep Rainwater Out of the Pans, Providing Effective Stormwater Management.
  • Polyethylene Covers are left in place until the railcar(s) arrive to be off-loaded or loaded. Lightweight covers mechanically lock into the polyethylene decking and will not blow off in windy conditions.
  • Unique stormwater feature is designed to eliminate “pooling” of rain that falls on top of the Center Pan Covers; rain is channeled onto the ballast between the tracks, stays out of the Pans.
  • Ultra-Track Pans Are Available In Two (2) Models:
    • Track Pans and Grates, No Covers
    • Track Pans with Grates and Covers
  • Low Maintenance – unlike carbon steel track pans, Ultra-Track Pans will not rust or corrode. Polyethylene resin is treated with a UV inhibitor, resists degrading effects of the sun.
  • Low Cost Installation — Lightweight Track Pans can be easily installed without heavy lifting equipment, i.e., forklifts, cranes, backhoes, etc. Minimal tools and labor required.
  • Slip Resistant Surfaces – Pans, grates and covers have been designed with safety in mind. All top surfaces resist slips when wet or oily.
  • Long Work Life – Estimated to perform 20-30 years.
  • Meets SPCC and EPA Stormwater Management Regulations.
  • Also meets New York State Chemical Bulk Storage Regulation Section 599.17c — Secondary Containment for Transfer Stations
Related projects